Hantek
 
 

Antec Nine Hundred Two

Posted


Category


Author

2009-02-03

Chassis

Chris Fredriksson

Manufacturer

Supplier

 

First off we are taking a look at the product package, it secretly shows off a bit of the gaming case and also tells you that it is designed by Antec in California. So hopefully we won’t see any other manufacturers with the same case ;)

Just by looking at the package you see that the top of the case has changed a bit and it now gives you more space to store your cd, dvd and other stuff that you might want to put on top of your computer. There are also some cavities on the sides of the top panel, design I guess, but what will they be used for? Storing screws perhaps? It’s up to you!




When we dig into the package and extract the gaming case we see that it is well packaged and protected with plastic so it won’t get scratched. After removing all of the padding we can see that this case, just like the earlier version is equipped with a window on the left side. Also the window is protected, this with anti scratch plastic film.

Let’s take a look at the front where the controls are. Here we see from left to right; Reset button, USB times two, eSata, one small hole, mic and headphones and finally the power switch button.

It all looks stylish and at first it may be hard to know which of the two 3.5 mm plugs is for the headphone and which for your microphone, but I guess it’s just up to you to test that out as Antec must have missed it in their quick installation manual or on the case itself.



You might wonder what the “small hole” is for, well it is actually a really stylish HDD led that when lit you just see it. But when your disk drives are idling you can’t see it at all.

If we guide our eyes a bit down on the front we’ll see that all of the 5.25 inch drive bays are covered with punched metal pieces. These are a little bit special, at least if you haven’t seen the earlier version of the Nine Hundred. First one, nothing special just unmount it and install your cd/dvd/blu-ray drive.



Second and third plate is covered on the inside with noise dampening material, both to lower the noise, if you don’t install anything in those two slots, and also to prevent air to be sucked in there instead of through the filters.

Because in the next two by three slots you have one air filter each and also a fan inside. These two fans are 120mm, blue led, TriCool fans. These fans are mounted on disk drive holders where you install your disk drives to get ultimate cooling, more on that later on.

Before we head on however, let’s have a look at two pins that you can see come through the honeycomb punched metal. These are actually trim potentiometers which are used to control the speed of the fan inside. You have two of these controllers on the front.





Next up is the top panel, which is housing the 200mm gigantic exhaust fan. As I said earlier you can also put things here, well perhaps not on top of the fan but in front of it ;)

The material you see here is all plastic, but it feels like it’s not the same old plastic cheaper chassis are made of, it feels strong and reliable.

The 200mm fan also has this punched metal as a fan guard. The honeycomb design is widely used today and if you don’t remember why everyone started with it, it’s because some engineer found out that it produce less noise than round holes so therefore you see it everywhere nowadays.

If we climb to the back of the case we can first have a look at the TriCool controller. Up here we have the controller for the rear fan and the top fan, as well as the led controller for the top fan.

Starting out it is set to low speed on both fans and the leds are turned off, I think this is a great feature that has gone one step further. Sad though that you can’t turn off the leds in the rear fan, but maybe this is their first test? I don’t actually know how it was on the previous version so I can’t say for sure there.

But we also find that the controller plate back here is ready for a second TriCool controller, perhaps in a coming case we will see two fans at the back?





The rear fan as well has the honeycomb punched metal to reduce noise from the air going through.

Furthermore we can see that we have 8 expansion slots for add-on cards, we also find two rubber covered holes to use an external water-cooling product with the case. This is more or less standard today.

At the bottom the power supply is housed, the Nine Hundred Two does not come with one pre-installed. Might be good however as the case is aimed at gamers who probably already have the most high-tech gear or choose to buy a new powerful power supply when they decide to get the Nine Hundred Two.

Not much, but there is enough space under the power supply if your power supply have a fan in the bottom to suck in air from inside the case and blow it out at the back.



Pretty much any ATX power supply should fit this case.

Last look is at the thumbscrews for the sidepanels, we get four in total and that is two for each side, perfect! Also have a look at the handles to open up the side panels, I really missed this on P182.




If we take a look on the left side of the Nine Hundred Two we can see that it is fitted with an acrylic window. Thanks to the anti scratch plastic film it has been well protected during transport. When we remove it we can see the good finish in it, like a mirror :)

Also found on the side panel is a mounting spot for a fan. This was also found on the previous version but this one has been improved since then, it now features a washable air filter.








On next page we’ll dig through the inside.

<- Previous page Next page ->


"Favourite" tools for: Antec Nine Hundred Two


User Comments, for review: Antec Nine Hundred Two
No comments posted, be the first to write a comment!


Write a comment
You must be registered and logged in to post comments.
Login | Register


Affiliate news
OCZ Technology Shutters Hypersonic-PC

> Techgage

OCZ Technology Shutters Hypersonic-PC
Over the past few months, it's become increasingly clear that OCZ has shifted its focus more towards its core products, and as a result, the company will no longer invest in things like cooling products, peripherals and so forth. Rather, it will focus on SSDs, memory and of course, power supplies. As I made my earlier post, I had wondered what OCZ's renewed focus would mean for Hypersonic-PC, and that was made clear to me earlier today.
OCZ Vertex Turbo 120GB SSD

> Techgage

OCZ Vertex Turbo 120GB SSD
Making the decision to upgrade to an SSD isn't difficult, but finding the "perfect" SSD is a different story thanks to the sheer amount of choice out there; sometimes even from the same vendor! Fortunately, OCZ's Vertex Turbo delivers a great blend of performance and GB per dollar, making it well worth consideration.
HIS Radeon HD 5670

> Tweaknews

HIS Radeon HD 5670
The HIS Radeon HD5670 is a very capable card for the cheap price of only US$89 at your favorite online retailer. Although it is not a screamer, at almost half the price of a HD5750, for the moderate gamer, it could be considered quite a deal for a videocard sporting such an impressive stock cooling solution.
4-Way Intel H55 Motherboard Shootout

> TechSpot

4-Way Intel H55 Motherboard Shootout
Right now there are a number of quality options for budget-conscious users looking to build a new computer. The AMD Phenom II X2 processor series, for example, will get you a fine deal of processing power at just $110 for the 3.2GHz flagship part. Combine this with the affordable AMD 785G based motherboards selling for around $70 and you have the makings of a seriously good value platform. However, if you are willing to part with a little more cash, then the new Intel Core i3 series might be the way to go. When compared to the dual-core Phenom II X2 555, consumers will pay about $20-$30 more for a Core i3 530 processor, while compatible Intel H55 motherboards are on average $20-$30 more than the AMD alternative as well. There are a number of H55 motherboards available at reasonable prices, so picking one for your next build is no easy task. Our round-up comprises 4 Intel H55 based motherboards from the likes of Asrock, Asus, ECS, and Gigabyte. With a narrow price range between $90 and $105, it all comes down to features and performance.
CiragoTV Pro CTP1000 Multimedia Player

> TestFreaks

CiragoTV Pro CTP1000 Multimedia Player
I’ve taken a look at a few media players here on TestFreaks and most are fairly decent and honestly they’re all pretty similar at least in the interfaces. Today for review I’ve got another one from Cirago called the CiragoTV Pro CTP1000. It’s a media player with HDMI, Component and Composite outputs so you can use it with any TV and it includes a 500gig hard drive for you storage. The CTP1000 also has a memory card reader and a USB port so you can read directly from memory cards, USB flash drives or USB hard drives so you can expand the storage or quickly view things without transferring them to the main hard drive. One thing about this product though is that it’s UBS only for transfers, there’s no networking with this unit, is that a good thing or a bad thing? Read on..
Able Planet True Fidelity NC300B

> Tweaknews

Able Planet True Fidelity NC300B
Able Planet as a company has really piqued my interest, too. They are committed to providing headphones for people with all levels of hearing. The Linx Audio technology aids in this by enhancing high frequency sounds where clarity is often lost in the early stages of hearing loss.
Customize Your Windows 7 Start Menu Bu

> TechSpot

Customize Your Windows 7 Start Menu Button
Windows users have been customizing their desktops in a variety of ways for years. Whether by downloading themes and backgrounds, or using third party applications to change more obscure settings like the default logon screen, many people seem intent on personalizing every aspect of their operating system to something that fits their individual taste. And what better to alter than an icon that's always visible? While we don't mind the Windows 7 Start Menu icon, and actually feel it's somewhat of a leap from the rectangular buttons of old, swapping out the orb for a new icon is quick and painless with the help of Kishan-Bagaria's Windows 7 Start Orb Changer. It even comes with a few examples to get you started.
Patriot Gamer-Series DDR3-1600 Memory

> Benchmark Reviews

Patriot Gamer-Series DDR3-1600 Memory Kit
Overclocking is getting easier than ever, and more and more users are finding that they want to try their hand at what used to be an art reserved for hardcore computer enthusiasts. In this article Benchmark Reviews tests the Patriot Gamer Series 4GB PC3-12800 DDR3-1600 dual-channel system memory kit, SKU PGS34G1600ELKA. Patriot designed this DDR3 kit to work with BEMPs (Black Edition Memory Profiles) that have been uploaded for use with the AMD Overdrive program in order to make overclocking even easier for the average enthusiast. This Patriot Gamer Series DDR3 RAM is designed to work in tandem with AMD Black Edition processors, but can be overclocked quite effectively in nearly any DDR3 compatible system. Priced at $130, the Patriot Gamer Series PC3-12800 DDR3-1600 kit represents a great opportunity for PC hardware enthusiasts to upgrade to low latency, high-performance memory at a very affordable price.
Cooler Master GX 550W Power Supply

> Vortez Hardware

Cooler Master GX 550W Power Supply
Cooler Master announced the GX series at the end of January and was showcasing these products to the world at CeBIT just last week. The GX series stand for Gamer Xtreme and comes in three power ratings - 550W, 650W and 750W hoping to target mid-range to high-end gaming systems by offering a single +12V rail designed to provide sufficient power to dual graphics card systems such as CrossFireX and SLi. The 750W version even comes with four PCIe connectors.
Cooler Master CM 690 II Advanced

> Tweaknews

Cooler Master CM 690 II Advanced
After going over the features and specifications of the CM 690 II Advanced chassis prior to the review, I had high hopes for the case. I wasn't disappointed. Cooler Master has taken the 690 design to the next level in virtually all the important areas.
Partners

Hantek, http://www.hantek.com/english/product.asp

Powered by

CityNetwork, http://www.citynetwork.se

CityCloud, http://www.citycloud.se/


Partners

Akasa, http://www.akasa.com.tw
AMD, http://www.amd.com
Antec, http://www.antec.com
BatchPCB, http://www.batchpcb.com
Boogie Bug, http://www.boogiebug.com
Caseking, http://www.caseking.de
CityCloud, http://www.citycloud.se
CityNetwork, http://www.citynetwork.se
Cooler Master, http://www.coolermaster-europe.com/
Coolstuff, http://www.coolstuff.se
Corsair, http://www.corsair.com
Futuremark, http://www.futuremark.com
Ikonik, http://www.ikonik.com
Intel, http://www.intel.com
Jetway, http://www.jetway.com.tw
Microsoft, http://www.microsoft.com
MikroElektronika, http://www.mikroe.com/en/
Mionix, http://www.mionix.net
Noctua, http://www.noctua.at
SteelSeries, http://www.steelseries.com
Swiftech, http://www.swiftnets.com
Titan, http://www.titan-cd.com
TRENDnet, http://www.trendnet.com
Twinmos, http://www.twinmos.com
Vizo, http://www.vizo.com.tw
Xigmatek, http://www.xigmatek.com
Zalman, http://www.zalman.co.kr/eng/main.asp

Zen Toolworks

ZeroTherm, http://www.zerotherm.net
ZOWIE Gear, http://www.zowiegear.com
View review list -
Affiliates